The OSHA Outreach Training Program is the primary method for training workers in the basics of occupational safety and health and preparing them for the hazards of accidents and injuries that can be preventable.
This course fullfills OSHA standards as required by OSHA regulations
Certain states (see state requirements below) and job sites require proof of OSHA safety training with a DOL Card. Increase your employment chances and get your DOL Card today!
The OSHA Outreach 30 Hour Training Course provides extensive instruction on OSHA regulations and requirements as they applyThis course provides a comprehensive safety program specifically designed for safety directors, foremen, and field supervisors; the program provides complete information on job safety and recognizing and preventing hazards on the job site.
Free HazCom & GHS Supplemental Course
A free Hazard Communication Standard (HazCom) and Globally Harmonized System of Chemical Classification and Labeling (GHS) course is included with registration of any OSHA Outreach course. The revised Hazard Communication Standard (29 CFR 1910.1200) took effect May 25, 2012 and OSHA requires training regarding chemical hazards in the workplace. OSHA states employees throughout the U.S. needed to have completed GHS-HAZCom training by December 1, 2013 to be in compliance with new GHS standards.
In this course, you will learn about the HazCom (Hazardous Communication) Standard and the new Globally Harmonized System (GHS), and how to use Safety Data Sheets (SDSs) and chemical labels to protect yourself from hazards or react to chemical exposures.
Free PDF Study Guide
Course also includes a free OSHA 30 Hour General Industry Study Guide! This PDF Study Guide will assist you to pass the final exam and receive your DOL wallet card. This guide is a great supplement to the OSHA 30 Hour General Industry Outreach Course and can help as a great quick reference guide for the future.
Note: The 30 Hour General Industry Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.
Hours: 30 hours
- Foremen, Superintendents, Project Managers, Safety Coordinators, or Safety Specialists
- Industries include but not limited to: Health Care, Manufacturing, Warehousing, Distribution, and Retail Industries employees
Subject Matter Expert:
- Outreach Trainer – Matt Luman – OSHAtrainer@360training.com
State Requirements: (See Details – PDF)
- Connecticut (requirement specific to certain kinds of job sites)
- Massachusetts (effective 2004)
- Missouri (effective August 28, 2009)
- Nevada (effective January 1, 2010)
- New Hampshire (requirement specific to certain kinds of job sites)
- New York (effective July 1, 2008)
- Pennsylvania (requirement specific to certain kinds of job sites)
- Rhode Island (requirement specific to certain kinds of job sites)
- Module 1A: Introduction to OSHA and the OSH Act
- Module 1B: Basic Safety Orientation
- Module 2: Walking & Working Surfaces (29 CFR 1910 Subpart D)
- Module 3: Emergency Action Plan (29 CFR 1910 Subpart E)
- Module 4: Hazardous Materials (29 CFR 1910 Subpart H)
- Module 5: Hazwoper
- Module 6: Personal Protective Equipment (29 CFR 1910 Subpart I)
- Module 7: Confined Spaces & Permit Required Confined Spaces
- Module 8: Lockout/Tagout (29 CFR 1910.147)
- Module 9: Materials Handling & Storage (29 CFR 1904)
- Module 10: Machine Guarding Safety (29 CFR 1910 Subpart O)
- Module 11: Welding, Cutting, and Brazing
- Module 12: Electrical Safety (29 CFR 1910 Subpart S)
- Module 13: Hazard Communication (29 CFR 1910.1200)
- Module 14: Hazardous Substances & Industrial Hygiene (29 CFR 1910 Subpart Z)
- Module 15: Bloodborne Pathogens (29 CFR 1910.1030)
- Module 16: Record Keeping & Reporting (29 CFR 1904)
- Module 17: Workplace Violence
- Module 18: Safety and Health Programs
- Module 19: Ergonomics
- Module 20: Hazards of Asbestos in the Workplace (29 CFR 1910.1001)
- Module 21: Lead Safety in the Workplace (29 CFR 1910.1025)
- Module 22: Ionizing and Non-Ionizing Radiation Safety
- Module 23: Formaldehyde Awareness (29 CFR 1910.1048)
- Module 24: Process Safety Management of Highly Hazard Materials
- Final Exam
Quizzes and Exam
At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course.
You will be given up to three tries to pass each module quiz. Failure to successfully pass a quiz will result in being locked out of the course and not allowed to continue.
Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this exam and complete the course.
You will be given up to three opportunities to pass the final exam. If you do not pass after three tries, you will be locked out of this course will no longer be able to take the course.
Course Completion Certificate & DOL Wallet Card
Upon successful completion of this course, a temporary printable certificate will be made available. Passing participants will receive a DOL General Industry Outreach course completion wallet card within 4-6 weeks.*
Upon enrollemnt in the OSHA 30-hour General Industry Outreach Training course, you will have 6 months from the time you start to complete it – in order to receive credit. After 6 months, your account will expire and you will be required to purchase the course again.
*Note: In order to receive your DOL wallet card, you must complete the survey at the end of the course.
About OSHA Outreach Certification
360training.com was among the first training providers to offer OSHA Outreach Training online, and grew to be one of the largest providers of online OSHA Outreach Training, training tens of thousands of workers each year.
In late 2012, 360training.com was reinstated as an OSHA Outreach online provider by the Directorate of Training and Education at the Occupational Safety and Health Administration (OSHA). The courses being offered have been reviewed and accepted by OSHA and completion of the OSHA Outreach 10/30-hour course(s) will result in a Department of Labor wallet card being issued in 4-6 weeks. Source: 360training.com Press Release
OSHA Outreach – Quick Course Info
OSHA Accepted: OSHA Outreach Courses are provided in partnership with OSHA Accepted Provider 360training.com.
Outreach Trainer – Matt Luman – OSHAtrainer@360training.com
- Certificate issued upon completion.
- Receive DOL/OSHA Card within 4-6 weeks.
- Updated with OSHA’s latest requirements.
- Fast and easy course completion
- 100% online – No classroom attendance.
- Money Back Guarantee! – 24×7 Support
OSHA Outreach – 30 Hour General Industry Training
(with Free Study Guide)