UST training in Alaska is required by federal law and is intended to ensure that those who own and operate underground storage tanks understand how to operate and maintain UST systems properly.
As required by the EPA, all UST operators must be trained by October 13, 2018. After this date, new Class A and B operators must be trained within 30 days of assuming duties. Class C operators must be trained before assuming duties. This applies to the entire state of Alaska as well as other states.
In 2015, the EPA revised the UST regulations which includes minimum training requirements for owners and operators of UST systems. Training is required per operator class:
- Class A training is required for person(s) having primary responsibility for on-site operation and maintenance of UST systems (owner or operator of a UST facility).
- Class B training is required for persons involved with daily on-site operation and maintenance of UST systems.
- Class C training is required for daily on-site employees having primary responsibility for addressing emergencies presented by a spill or release from a UST system.
Alaska UST Operator Training Courses
Alaska UST Class A/B Operator Training
Alaska Class A operators have primary responsibility for on-site operation and maintenance of a UST facility. This individual is generally the owner of the station or the designee. For large corporations, this person is the manager or designee responsible for tank operations.
Alaska Class B operators have responsibility for the day-to-day aspects of operating, maintaining, and record keeping of a UST facility. This individual (or individuals) is generally the owner or the person/company contracted by the owner to maintain the tanks. For large corporations, this person is the employee, or person/company contracted by the corporation to maintain the tanks.
Description
The UST Class A/B operator training course is presented in chapters. Each chapter utilizes multimedia to enrich the learning experience. Each chapter is followed by a quiz. If the student answers a quiz question incorrectly, the quiz feedback redirects the student to the correct course information.
In addition to the quizzes, the UST Class A/B operator training course includes a final exam of 100 questions, 80% of which must be answered correctly in order to print a certificate.
There is not any time restriction to access the course, so students can complete the entire course in a single session (approximately 4 hours plus exam time) or take the course in segments.
Duration: 4 hours
Purpose & Objective
The purpose of the Underground Storage Tank (UST) Training Program is to protect human health and the environment by preventing future petroleum underground storage tank releases and remediating existing petroleum underground storage tank contamination.
Class A operators must be trained how to manage resources and personnel; maintain compliance with federal, state, and local regulations; ensure that required records are kept; and that operators at the facility are trained to respond to releases, spills, and other emergencies.
Class B operators must be trained how to meet recordkeeping and reporting requirements; ensure that equipment complies with industry standards; and train personnel to properly respond to emergencies caused by releases or spills.
By combining Class A and Class B operator training into a single test, important employee cross-training is achieved.
Course Outline
- Chapter 1: Operator Overview
This chapter describes the primary responsibilities of the Class A, Class B, and Class C operator. It also includes the training requirements for each class of operator. - Chapter 2: System and Components
This chapter seeks to raise environmental awareness as well as clearly communicate a fundamental comprehension of UST systems. Components covered include secondary containment, emergency shut-off valves, vapor recovery, tank materials, and piping materials. A download of UST terminology is available here. - Chapter 3: Release Detection
This chapter emphasizes release detection methods. Equipment testing, the analysis of test results, as well as monitoring of the UST system are addressed in this chapter. Release detection methods covered include automatic tank gauging (ATG), inventory control, secondary containment with interstitial monitoring, statistical inventory reconciliation (SIR), manual tank gauging, vacuum monitoring, soil vapor monitoring, groundwater monitoring, and tank tightness testing. Release detection methods for piping, such as electronic and manual line leak detectors, are also discussed. - Chapter 4: Release Prevention
This chapter prompts the trainee to be proactive in preventing spills and releases. It covers the system components that are designed to prevent corrosion, spills, and overfills. These include spill buckets and sumps as well as sacrificial anode and impressed current cathodic systems, overfill protection valves, overfill alarms, and ball float valves. Secondary containment as well as alarms and warnings are covered in this chapter. An EPA Correct Filling Checklist is available for download. - Chapter 5: Planning and Response
The focus of this chapter is preparation for a release and initial response actions. Topics include recognizing warning signs of a leak, maintaining spill kits, knowing the location of the Emergency Stop button, and posting emergency contact information. Critical attention is given to clean-up and release reporting requirements, including sensitive receptor protection and state notification requirements. - Chapter 6: Financial Responsibility/Financial Documents
Owners and operators of petroleum USTs must demonstrate financial responsibility for bodily injury and property damage caused by spill and releases. This chapter covers financial responsibility statutes and financial assurance mechanisms as well as recordkeeping and reporting requirements. - Chapter 7: Registration and Installation
This chapter discusses required documentation and reporting. Topics include tank permits, registration and administrative documents, and UST installation requirements. - Chapter 8: Inspection and Closure
UST testing and inspection requirements are covered in this chapter. Delivery prohibition and temporary and permanent tank closures are also addressed.
End of Course Instructions
Print a copy of your completion certificate for your employer and records. You may also login and reprint your certificate at any time.
Alaska UST Class C Operator Training
Alaska Class C Operators are the first responders to emergency situations at a UST facility – like a gas station or convenience store. These individuals are usually the clerks of a facility.
Class C Operators monitor fuel deliveries to the tanks; control and/or monitor the dispensing or sale of regulated substances; and respond to alarms, releases, and other emergency situations.
Course Description
The UST Class C operator training course consists of seven chapters. Each chapter is followed by a short quiz. Once a student has completed all chapters and quizzes, the learner will be directed to print out a course checklist.
The course is instructed through a student orientation tour of a mock facility, where a manager (or Class B Operator) will identify and explain each topic and then mark them off a checklist when completed. When the checklist has been completed, the student can then print the UST Class C operator certificate.
There is not any time restriction to access the course, so students may take as much time as needed to complete their training.
Duration: 1 hour
Purpose & Objective
The purpose of the Underground Storage Tank (UST) Training Program is to protect human health and the environment by preventing future petroleum underground storage tank releases and remediating existing petroleum underground storage tank contamination.
Class C operators must be trained how to respond to emergencies (such as situations posing an immediate danger or threat to the public or to the environment and that require immediate action) and alarms caused by spills or releases from an underground storage tank system.
Course Outline
- Chapter 1: Facility Overview
This chapter provides a basic overview of the primary components of a typical UST facility. These components include the USTs, manways, spill buckets, fuel dispensers, and dispenser nozzles. - Chapter 2: Monitoring
This chapter emphasizes the components used to monitor a UST facility. Students will learn what an Automatic Tank Gauge (ATG) is and does, how to interpret its alarms and warnings, and what to do in case of an alarm. The role of line leak detectors is also discussed. - Chapter 3: Environmental
In this chapter, students learn about sensitive receptors, or places where a fuel spill may leave the facility and enter the environment. The chapter also introduces students to the spill kit and its contents, and how to use spill kit components to contain spills threatening sensitive receptors like curb breaks and drains. - Chapter 4: Fueling Rules
The focus of this chapter is fuel delivery safety. Students will watch a short video on proper fueling procedures. Students also learn about hazards at the fueling point, including smoking, static electricity, leaving a vehicle unattended while fueling, and leaving a vehicle running while fueling. - Chapter 5: Delivery Procedures
This chapter teaches the student how to supervise a fuel delivery and monitor for problems during a fuel delivery. Additional emphasis is placed on the ATG and on overfill prevention devices like overfill prevention valves and ball float valves. Delivery prohibitions are also addressed. - Chapter 6: Safety
This chapter covers safety information every Class C Operator needs to respond to emergencies. Included here is a video explaining when and how to use a fire extinguisher. The Emergency Stop and All Stop buttons are identified and discussed. - Chapter 7: Emergency Situations
This chapter discusses common emergency situations and proper responses to them, including what to do if a vehicle leaves the facility with the nozzle still in the vehicle’s fuel spout. Managing customer traffic in the event of a spill is also covered. Correct fire extinguisher operation is reviewed. - Chapter 8: Final Checklist
Review and complete the checklist to complete your training
End of Course Instructions
Print a copy of your completion certificate for your employer and records. You may also login and reprint your certificate at any time.
Alaska UST State Agency & Regulations
The Alaska Department of Environmental Conservation (DEC) – Division of Spill Prevention and Response (SPAR) – Prevention Preparedness and Response Program (PPR) protects public health, safety and the environment by preventing and mitigating the effects of oil and hazardous substance releases and ensuring their cleanup while providing technical and regulatory assistance on regulated UST systems.
Agency Links:
UST Training in Alaska
n 2011, the State of Alaska Department of Environmental Conservation (department) amended the state UST rules (18 AAC 78, Article 1) to include the new federal requirements, including the development of an UST operator training program.
Alaska’s updates to the state UST rules went into effect on July 25, 2012 and made operator training a mandatory requirement for all the State of Alaska UST owners and operators that each UST facility must have had a designated Class A, B, and C operator and been trained by December 31, 2012.
Alaska has not yet been granted state program approval (SPA).
Retraining Requirements
If UST system is found to be out of compliance or in significant violation of UST regulations, Class A and Class B re-training is required. Class C operators will be required to receive and document annual refresher training in addition to the initial training. Voluntary refresher training to ensure operator is current on regulations and procedures is encouraged.
References:
- Alaska Administrative Code (AAC) | Title 18 Environmental Conservation | Chapter 78 Underground Storage Tanks | Article 1 Underground Storage Tanks
- Alaska UST Operator Training regulations are contained in 18 AAC 78, Article 1 – 18 AAC 78.008. Operator training.
UST Program
Alaska Department of Environmental Conservation
Division of Spill Prevention and Response
Industry Preparedness Program
Underground Storage Tanks
555 Cordova St.
Anchorage, AK 99501-2617
Phone: 907-269-7886
Fax: 907-269-7600
UST Program: http://www.dec.alaska.gov/spar/ipp/tanks.htm
LUST Program
Alaska Department of Environmental Conservation
Division of Spill Prevention and Response
Contaminated Sites Program
Leaking Underground Storage Tanks
410 Willoughby Avenue, Suite 303
Juneau, AK 99811-1800
Phone: 907-465-5206
Fax: 907-465-5218
LUST Program: http://www.dec.state.ak.us/spar/csp/leaking.htm
Fund Program*
Alaska Department of Environmental Conservation
Division of Spill Prevention and Response
Response Fund Administration
410 Willoughby Avenue, Suite 303
Juneau, AK 99811-1800
Phone: 907-465-5270
Fax: 907-465-5262
Fund Program: http://www.dec.state.ak.us/spar/rfa/index.htm
*This fund does not provide federally-required coverage to finance all UST cleanups and does not fulfill the federal financial responsibility requirement.
UST Training Course Info
Alaska UST Operator training courses meet federal requirements for UST training.
- Fast and easy course completion
- 100% online – No classroom attendance
- No time limit – Finish at your pace
- Certificate upon completion
- 24×7 Online Support: Click here
- Money Back Guarantee
Alaska UST Operator Training
Class A/B – 4hrs
Price: $150.00
Alaska UST Operator Training
Class C – 1 hr
Price: $10.00
Training Multiple Employees?
Get volume discounts by enrolling and training all your employees. Enjoy tailored corporate solutions and training services – a free cloud-based LMS and even consulting services. Track progress, generate reports, and manage learners online. More Info
Accepted Statewide
We offer online UST Operator Training in Alaska for: Anchorage, Fairbanks, Wasilla, Municipality of Anchorage and many more!
Getting your Alaska UST Operator Training couldn’t be easier!
